About this profile
Jamb and casing made as one set
We make the jamb and the casing together, so the wood, the profile and the finish match around the door opening. Tell us which pieces you need and how each one will be finished.
Before we quote, we go through the wood, the visible grade, the moisture content, the sections and the packing with you. Wood varies from piece to piece, so you approve a sample that shows the variation to expect.
Selection notes
Custom options
Coordinated components
We plan the jamb and casing sizes together, around your door and how it is fitted.
Wood and grade
Tell us the wood, the visible grade and the finish your market expects.
Sample first
You approve the profile and the natural look of the wood on a sample before production starts.
How it’s made
See how it’s made in 3D
Follow the casing through our line step by step, then take it apart to see the two glued strips, the gesso coat and the primer.
Drag to turn it
The 3D view is not available in this browser. The steps below describe the same process.
-
Solid wood boards are dried and planed flat.
-
The boards are ripped into a face strip and a return strip, and a moulder shapes and sands both.
-
The return strip is glued to the edge of the face strip and pressed, making the L-shaped casing.
-
A thin gesso coat goes on through a die shaped like the section, over the face, the corner and the return.
-
The gesso is dried and sanded smooth along the whole length.
-
A white primer coat finishes the casing. It is ready for the final paint.
Illustration of an L-shaped casing glued from two strips. Sizes and layer thicknesses are drawn, not measured; not to scale.
Order details
Sizes and specification
These are our catalogue sizes. Ask us which are in stock, or send a drawing for a section made to order. The quotation gives the final sizes, grade, minimum order and packing.
| Product code | D01 |
|---|---|
| Catalogue size | Typical 2000 x 80 x 15/25 mm. Other sizes are made to order. |
| Custom sizes | Send the length and a cross-section with dimensions. The quotation gives the tooling and tolerance for that profile. |
| Material | Solid pine / solid wood; white primer or natural. Certificates and test reports are available on request. |
| Surface and colour | Natural or primed white; stained, clear-coated or painted on request. You approve the colour and coating on a sample. |
| Minimum order | Minimum order: one 20ft container, negotiable. The mix of profiles and finishes is agreed in the quotation. |
| Packing | Protective film or paper, in bundles or cartons, on pallets if you need them. The quotation gives the piece count, gross weight and pallet details. |
| What can be customised | Wood, grade, profile, matching jamb and casing, width, thickness, length, primer or natural surface, labels and packing. |
Where it is used
For traditional and premium interior doors
For door factories and project buyers who want real solid wood and accept its natural variation.
- Interior door jamb-and-casing sets
- Painted or natural door packages
- Villa, apartment and hospitality interiors
- Renovation work and distributor ranges
How an order works
Drawing, sample and order
Send your details
Send your drawing or sample, the material, finish, quantities and destination. We check them and come back to you.
Approve the sample
We make a sample. Once you approve it, it sets the standard for the profile, the colour or primer and the checks on your order.
Production and packing
We check production and packing against the approved sample before the goods ship.
Quality focus
What we check
- Wood and visible grade against the approved sample
- Profile, dimensions and the fit of jamb to casing
- Moisture content (8–12 %) and joints
- Surface preparation, primer or natural appearance
- Protection against marks in transit, and packing
Test reports: tell us which certificates or test reports your order needs. They are available on request.
Product FAQ
Common questions
Which wood species can be used for the jamb and casing?
Our catalogue jamb and casing is solid pine. If you need another wood, tell us which one and we will tell you whether we can supply it.
Can the jamb and casing be supplied as a coordinated set?
Yes. Send the door construction, wall thickness, jamb sizes and casing profile, and we make them as one set.
Can the surface be natural or primed?
Yes, both. Primed casing gets gesso and a white primer, ready for your final paint. Natural casing has no coating.
How is natural wood variation handled?
Solid wood always varies in grain and colour. You approve a sample that shows the visible grade and the range you accept, and we work to it.
What is required for a firm quotation?
Send the drawing or sample, the wood, finish, quantity and destination. The minimum order is one 20ft container, negotiable, and custom orders take 15–30 days.
Related information
Related products and guides
Looking for primed casing in standard sizes? We run flat, grooved and decorative sections 30–80 mm wide. See the standard primed sections →
Request a quote
Request a quotation for Solid Wood Door Jamb & Casing
Send your drawing or sample, the dimensions, finish, quantity, packing and destination port, and when you need the goods. We reply as soon as we see your message.
Send Your Product RequirementRelated
